Shipping worldwide — Middle East · Southeast Asia · Africa
Home/Hospital Beds/Nursing Bed
Nursing Bed · Manufacturer

Multi-Function Nursing Bed — Auto Turn-Over & Commode Toilet

Engineered for nursing homes, long-term care facilities and bedridden patient care. Auto turn-over reduces pressure-sore risk; integrated commode toilet hole simplifies hygiene routines. Fully-electric, semi-electric and manual versions available.

±60° auto turn-over Integrated commode Quiet < 50 dB 3 versions
Multi-function nursing bed with auto turn-over and commodeNursing Bed · Factory Photo
MOQ10 sets
Lead Time25–35 days
Load Capacity220 kg
Container Load55 sets / 40HQ
Three Configurations

Fully Electric · Semi-Electric · Manual

Same frame and turn-over mechanism — choose the motor configuration that fits your facility's budget and care model.

Fully Electric

★ Best Seller

All functions motorized: turn-over, backrest, leg, height, toilet lifting. Single caregiver can operate independently. Wireless pendant remote standard.

  • Electric turn-over ±60°
  • Electric backrest 0–80°
  • Electric leg 0–40°
  • Electric height 380–680 mm
  • Electric toilet lift
  • Wireless remote

Semi-Electric

Value Pick

Electric backrest and leg, manual crank for turn-over and height. Best balance of automation and price — popular for nursing homes scaling resident count.

  • Manual turn-over ±60°
  • Electric backrest 0–80°
  • Electric leg 0–40°
  • Manual height adjustment
  • Manual toilet lift
  • Wired pendant

Manual

Budget Tier

All functions hand-cranked. Lowest cost, no electricity required, popular in rural elderly care homes and low-budget tenders.

  • Manual turn-over ±60°
  • Manual backrest 0–80°
  • Manual leg 0–40°
  • Fixed or hand-crank height
  • Manual toilet hole
  • No power required
Full Specification Sheet

Technical Specifications

Validated engineering specs for the fully-electric version. Semi-electric and manual share frame and dimensions.

Nursing bed technical specifications
Model Codes
HSJ-NB-FE · HSJ-NB-SE · HSJ-NB-M
Overall Dimensions
2100 × 980 × 380–680 mm
Mattress Platform
2000 × 900 mm (with toilet cutout)
Safe Working Load
220 kg
Turn-Over Angle
±60° left / right (electric or manual)
Backrest
0–80°
Leg Section
0–40°
Toilet Hole
280 × 180 mm with removable bedpan
Frame Material
Cold-rolled steel + ABS
Motors (FE)
5 × TiMOTION silent actuators · < 50 dB
Voltage
110V / 220V, 50/60 Hz
Side Rails
Foldable ABS, central locking
Castors
Ø125 mm, 4 with brake
Standard Accessories
Bedpan, dining table, IV pole, lift bar
Packing
Knock-down · 5-layer corrugated carton
Container Loading
55 sets / 40HQ · 26 sets / 20FCL
Certification
CE-supported docs · ISO 13485 facility
Where Nursing Beds Fit Best

Common Applications

Nursing beds shine wherever residents stay in bed for weeks or months — the auto turn-over and commode save caregiver hours every day.

Nursing Homes

Long-term residential care — the auto turn-over reduces pressure-sore incidence by ~60% versus manual repositioning. Fully-electric is the standard spec.

Elderly Care Centers

Assisted living for residents with mobility challenges. The integrated commode preserves dignity and simplifies caregiver routines.

Long-Term Acute Care

Step-down units for ventilator weaning, stroke recovery and complex wound care patients staying 30+ days.

Hospice & Palliative Care

End-of-life care facilities — quiet motors (< 50 dB) preserve patient comfort. Manual or semi-electric versions popular for budget-sensitive hospice operators.

Spinal Cord Injury Units

SCI patients with paralysis benefit from auto turn-over to prevent decubitus ulcers. Loading capacity 220 kg accommodates assistive equipment.

Government Elderly Tenders

MOH and social welfare ministry tenders for state-run elderly facilities. Full tender documentation prepared per local registration format.

Side-by-side

Nursing Bed vs Other Hospital Beds

When a nursing bed is the right call vs other bed types.

FeatureNursing BedElectric 5FHome CareManual
Auto turn-over✔ ±60°
Integrated commode
Dining tableOption
Loading capacity220 kg250 kg200 kg200 kg
Quiet motors (< 50 dB)N/A
Versions availableFE / SE / MElectric onlyElectric onlyManual only
Best use caseNursing homesHospital wardsHome residentialTownship / clinic
40HQ container loading55 sets60 sets65 sets90 sets
Relative price$$$$$$$$$
FAQs

Nursing Bed — FAQ

The questions buyers ask most often about multi-function nursing beds.

The mattress platform is split into a left/right turn-over plate hinged at center. Pressing the turn-over button on the pendant raises one side electrically up to 60° while the other stays flat — rolling the resident onto their side. Hold time is typically 30 minutes per side. Recommended turn-over cycle is every 2 hours for bedridden residents.
A 280 × 180 mm cutout in the mattress platform aligns with a removable bedpan suspended below. A sliding cover plate keeps the platform smooth for normal use; when needed, slide it open to expose the bedpan. The bedpan is removable for cleaning. Toilet paper holder optional on the side rail.
Turn-over motion is smooth and slow — full ±60° rotation takes ~25 seconds. Motors operate under 50 dB. The mattress platform's foam-covered hinges prevent pinching. Most residents remain asleep through routine turn-over cycles.
Fully-electric is the standard for modern nursing homes — caregiver labor savings pay back the price premium within 18 months. Semi-electric works for facilities with mixed acuity (some residents need turn-over, some don't). Manual is best for budget-tight facilities or rural elderly care where electricity is intermittent.
Tested at 30,000 turn-over cycles — equivalent to ~7 years of use at 12 turn-overs per day. Motors and hinges are replaceable in 20 minutes with included spare parts kit. 24-month warranty on the turn-over mechanism, 12 months on motors.
Yes — free logo silk-screen on foot board from 30 sets, free color box from 30 sets, multilingual manuals (EN / AR / ID / VI / ES) free from 50 sets. Custom bed colors (cream, light wood, gray) available from 30 sets. Wooden head/foot board upgrade available for premium nursing home tier.
55 sets per 40HQ for fully-electric, 60 for semi-electric, 65 for manual. 26 sets per 20FCL. Beds ship knock-down — bedpan, dining table and accessories pack inside the bed carton.
24 months frame, 12 months motors/controllers/pendants, 24 months turn-over mechanism. Spare parts kit (2 motors, 1 controller, 1 pendant, 4 casters, 1 bedpan) included free with every container.
Get Your Nursing Bed Quote

Tell Us Your Facility Type — Quoted in 12 Working Hours

Share version (FE / SE / M), quantity, destination port and any OEM needs. We will reply with itemized FOB / CIF quotation, production schedule and load planning sheet within 12 working hours.

Request Nursing Bed Quote

Fields marked * are required.

You can also send your procurement list directly by WhatsApp: +86 150 3099 3133.